GWM Weld Screw PDF Spec Sheet

 - Parts Linked To 3D/2D CAD Models - 
Thread Size & Pitch M3.5 x 0.6-6g M4 x 0.7-6g M5 x 0.8-6g M6 x 1-6g M8 x 1.25-6g M10 x 1.5-6g
Head Dia. - A 7.0
± 0.25		 8.0
± 0.25		 10.0
± 0.25		 12.0
± 0.30		 16.0
± 0.30		 20.0
± 0.40
Height - H 1.1
± 0.13		 1.2
± 0.13		 1.6
± 0.13		 1.9
± 0.13		 2.5
± 0.13		 3.1
± 0.13
Projections Dia. - P 1.40
± 0.13		 1.78
± 0.13		 2.13
± 0.13		 2.54
± 0.13		 3.10
± 0.13		 3.56
± 0.13
Height - F 0.53
± 0.05		 0.64
± 0.05		 0.81
± 0.05		 1.02
± 0.05		 1.20
± 0.05		 1.40
± 0.05
Thread Size & Pitch M3.5 x 0.6-6g M4 x 0.7-6g M5 x 0.8-6g M6 x 1-6g M8 x 1.25-6g M10 x 1.5-6g
L
Length
(Overall)

Tolerance
Up to 25mm
+ 0.0 - 0.8

Over
25mm to 50mm
+ 0.0 - 1.6

Over 50mm
+ 0.0 - 2.3

 6.0 GWM 03506 GWM 04006
8.0 GWM 03508 GWM 04008
10.0 GWM 03510 GWM 04010 GWM 05010 GWM 06010
12.0 GWM 03512 GWM 04012 GWM 05012 GWM 06012
14.0 GWM 03514 GWM 04014 GWM 05014 GWM 06014
16.0 GWM 03516 GWM 04016 GWM 05016 GWM 06016 GWM 08016
20.0 GWM 03520 GWM 04020 GWM 05020 GWM 06020 GWM 08020 GWM 10020
25.0 GWM 03525 GWM 04025 GWM 05025 GWM 06025 GWM 08025 GWM 10025
30.0 GWM 04030 GWM 05030 GWM 06030 GWM 08030
35.0 GWM 05035 GWM 06035 GWM 08035 GWM 10035
40.0 GWM 05040 GWM 06040
45.0 GWM 05045 GWM 08045 GWM 10045
55.0 GWM 10055

An OHIO metric GWM weld screw has three projections on top of the head for welding to the sheet surface, not through it. From a design standpoint, the GWM screw will eliminate the necessity for holes, thus is ideal for those applications where product appearance or potential leakage is a prime consideration. There are no screw heads to protrude or spoil appearance or the product. With GWM metric screws, the exterior surface is left virtually unmarred. The GWM weld screw is an excellent choice for blind locations too, because it can be permanently pre-attached.

Material and Thread Information

Material:

 C1010 High-Welding Tensile Strength: 60,000 psi
Quality, Low Carbon Steel Yield Point: 30,000 psi
Finish: Plain, Unless Specified Shear Strength: 30,000 psi
Threads: ASME B 1.13M-2005 Elongation 2" 30% Max.

Buckeye Fasteners, Inc. distributes weld fasteners, leg levelers and adjusting screws. Inch and metric threads are available. Fasteners in low carbon and stainless steel. Custom Multisource Fasteners
 Now With 3D/2D Modeling Of Our Entire Line!
5582 Tomken Road &bull Mississauga, ON, L4W 1P4
(905) 624-2828 • FAX: (905) 624-1613 E-Mail: Ohio Nut and Bolt of Canada

For Sales Of OHIO Product In The United States, Contact;
The Ohio Nut and Bolt Company
33 Lou Groza Blvd. • Berea, Ohio 44017-1293 USA
(440) 243-0200 • FAX: (440) 243-4006